Pro-series 51108 51 Receiver Bedienungsanleitung PDF herunterladen

Installation Instructions

Toyota Tacoma

Part Numbers:

51108

Hitch Shown In Proper Position

Equipment Required:

Wrenches: 18mm, 19mm, ¾, 7/8

Drill Bits: None

1. Disconnect the license plate light wiring connection from bumper.

2. Remove the two bolts mounting bumper to bumper brackets each side. Remove bumper from vehicle.

3. Remove bumper brackets from frame rails, two bolts each side.

4. Position receiver on frame and install ½” bolt and block through rearmost hole in frame rail into angle bracket as shown above.

5. Reinstall bumper brackets over receiver side bracket placing tab through hole provided in side bracket.

6. Reinstall bumper, placing blocks between bumper mounts and bumper brackets. Using existing fasteners removed in Step 2,

adjust bumper and reconnect license plate wiring connection.

Tighten all ½-13 GR5 fasteners with torque wrench to 75 Lb.-Ft. (102 N*M)

Rev. A7-24-0951108NSheet 1 of 3

z 2009 Cequent Performance Products

Hex Nut – M12 x 1.25 Qty. (4)

Hex Nut ½-13Qty. (2)

Lock Washer – ½”Qty. (4)

Conical Toothed Washer ½”Qty. (2)

Flat Washer (Hardened) - ½”Qty. (4)

Spacer Block ¼ x 1-1/2 x 2Qty. (6)

Hex Bolt M12 x 1.25 x 35mm CL8.8Qty. (4)

Hex Bolt ½-13 x 1.50 GR5Qty. (2)

Tighten all M12 x 1.25 CL8.8 fasteners with torque wrench to 68 Lb.-Ft. (92 N*M)

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to prevent

entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working beneath a

vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and

SAE J684.

Fastener Kit: 51108N

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

500 (227 Kg.)5000 (2270 Kg.)

Weight Carrying

Ball Mount

550 (250 Kg.)5500 (2497 Kg.)

Weight Distributing

Max Tongue

WT (LB)

Max Gross

Trailer WT (LB)

Hitch type

Wiring Access Location: PU1, PU2

Form: F205 Rev A 5-6-05

Tab

Bumper Bracket

Existing Bolt

Existing Weldnut

5678

576

1234

1 2 3

Inhaltsverzeichnis

Seite 1 - Installation Instructions

Installation InstructionsToyota TacomaPart Numbers:51108Hitch Shown In Proper PositionEquipment Required:Wrenches: 18mm, 19mm, ¾, 7/8Drill Bits: None1

Seite 2 - Instructions d’installation

Instructions d’installationToyota TacomaNuméro de pièce :51108Attelage montré dans la position appropriéeÉquipement requis :Clés : 18 mm, 19 mm, ¾, 7/

Seite 3 - Instrucciones de instalación

Instrucciones de instalaciónToyota TacomaNúmeros de partes:51108El enganche se muestra en la posición correctaEquipo necesario:Llaves: 18mm, 19mm, ¾,