Pro-series 44092 51 Receiver Bedienungsanleitung PDF herunterladen

Installation Instructions

Jeep Grand Cherokee

Part Numbers:

44092

51059

Hitch Shown In Proper Position

Equipment Required:

Wrenches: 18mm, 19mm

Drill Bits: None

Fascia

No Drilling Required

1. Remove tow hook bracket if present.

2. Remove the M12 fasteners from the five (5) rearmost vehicle frame weldnuts. The skid shield will remain in place.

3. Raise hitch into position and install/re-install fasteners as shown above.

Note: Use existing fasteners if vehicle is equipped with reinforcement bars.

Rev. A6-27-06N51059Sheet 1 of 1

z 2002, 2006 Cequent Towing Products

SpacerQty. (2)

Lock Washer 1/2Qty. (2)

Flat Washer 1/2Qty. (2)

Hex Bolt M12 X 1.75 X 45Qty. (2)

Tighten all M12 CL10.9 fasteners with torque wrench to 75 Lb.-Ft. (102 N*M)

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to

prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working

beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5

and SAE J684.

Fastener Kit: F51059

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

300 (136 Kg)3500 (1589 Kg)

Weight Carrying

Ball Mount

500 (227 Kg)5000 (2270 Kg)

Weight Distributing

Max Tongue

WT (LB)

Max Gross

Trailer WT (LB)

Hitch type

Wiring Access Location: SUV3

Skid shield

Frame

Existing weldnuts

Reinforcement

bar

For vehicles not

equipped with

reinforcement bars

For vehicles equipped with

reinforcement bars existing M12

fasteners

Skid shield

Existing hole

Tow hook

bracket

SERIES 51®

Form: F205 Rev A 5-6-05

Installation Instructions 1

Inhaltsverzeichnis

Seite 1 - Installation Instructions

Installation InstructionsJeep Grand CherokeePart Numbers:4409251059Hitch Shown In Proper PositionEquipment Required:Wrenches: 18mm, 19mmDrill Bits: No

Kommentare zu diesen Handbüchern

Keine Kommentare

Pro-series 44092 51 Receiver Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Pro-series 44092 51 Receiver herunter. Pro Series 44092 51 Receiver User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Pro-series 44092 51 Receiver