Pro-series 51196 51 Receiver Bedienungsanleitung PDF herunterladen

Installation Instructions

Toyota Sienna

Part Numbers:

51196

Do Not Exceed Lower of Towing Vehicle

Fascia

Hitch Shown In Proper Position

Equipment Required:

10 19

6” Ratchet

Fastener Kit: 51196F

Manufacturer’s Ratin

Wiring Access Location: SUV1, 2

Hitch type

Max Gross

Trailer WT (LB)

Max Tongue

WT (LB)

Weight Distributing

5000 (2270 Kg) 500 (227 Kg)

Weight Carrying

Ball Mount

3500 (1589 Kg) 350 (159 Kg)

renc

es:

mm,

6”

Ratchet

Extension, Large screwdriver

Drill Bits: None

Existing Weldnut

3 Places

(Both Sides)

Frame Rail

Area to be trimmed

To be reinstalled

Note:

Fasteners Typical

Both Sides

Area

trimmed

To be reinstalled

Figure 2

Sport Model

Appearance panel

For vehicles with appearance panel: Remove appearance panel which covers the trunk pan. This panel will need to be trimmed or not reinstalled

Qty. (6) Flat Washer, 1/2”

Qty. (6) Hex Bolt, M12 x 1.25 x 40mm

Qty. (6) Lock Washer, 1/2”

Area to be trimmed

Figure 1

on vehicle. Ask vehicle owner their choice before starting installation. See Figure 2

1. Remove plastic plugs, from existing holes (if present).

2. Raise hitch into position over the exhaust pipes aligning the slots in the hitch with the weldnuts in the bottom of the frame rails. NOTE:

Lowering exhaust may ease installation. Spraying a lubricant on the metal hanger rod and the rubber isolator helps removal.

3. Install fasteners as shown above.

4. Torque all fasteners to specifications shown below.

5. Raise exhaust back into position, if lowered prior to hitch installation.

6. Reinstall trimmed cover panel removed. Or return untrimmed panel to vehicle owner.

z 2010 Cequent Performance Products

Sheet 1 of 3 51196N 6-1-10 Rev. A

Tighten all M12 CL10.9 fasteners with torque wrench to 75 Lb.-Ft (102 N-m).

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to

prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working

beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5

and SAE J684.

1 2 3

Inhaltsverzeichnis

Seite 1 - Installation Instructions

Installation InstructionsToyota SiennaPart Numbers:51196Do Not Exceed Lower of Towing Vehicle FasciaHitch Shown In Proper PositionEquipment Required:W

Seite 2 - Instructions d’installation

Instructions d’installationToyota SiennaNuméros de pièces :Ne pas excéder les spécifications du Carénage51196Attelage montré dans la position appropri

Seite 3 - Instrucciones de instalación

Instrucciones de instalaciónToyota SiennaNúmeros de partes:No supere el valor inferior de la clasificación Facia51196El enganche se muestra en la posi

Kommentare zu diesen Handbüchern

Keine Kommentare

Pro-series 51196 51 Receiver Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Pro-series 51196 51 Receiver herunter. Pro Series 51196 51 Receiver User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Pro-series 51196 51 Receiver