Pro-series 51235 51 Receiver Bedienungsanleitung PDF herunterladen

Installation Instructions

Chevrolet Silverado Pickup 1500

GMC Sierra Pickup 1500

(Requires OEM Bumper)

Part Numbers:

51235

Hitch Shown In Proper Position

Equipment Required:

Wrenches: 3/4, 21mm & 22mm

Drill Bits: None

Frame rail

Fasteners Typical Both Sides of Vehicle

Note: Factory Installed Steel Step Bumper and Brackets Must Be Used In Conjunction with Hitch

Note: Loosen the spare tire for ease of installment

1. Remove existing M14 bolts from end of each frame rail.

2. Lift receiver into position, locating rearmost slots in receiver under existing weldnuts in vehicle frame.

3. Install new M14 bolts through receiver into weldnuts in vehicle frame and into step bumper.

4. Install remaining fasteners as shown.

5. Tighten all fasteners to the required torque specification.

6. Re-tighten the spare tire

Qty. (2) Hex bolt M14 X 2.0 X 40mm CL 10.9

Qty. (6) Spacer

Qty. (2) Lock washer 9/16”

Qty. (6) Conical washer ½”

Qty. (2) Flat washer 9/16”

Qty. (6) Hex nut ½-13

Qty. (6) Carriage bolt ½-13 X 1-3/4” GR5

Tighten all ½-13 GR5 fasteners with torque wrench to75 Lb.-Ft. (102 N*M)

Tighten all M14 CL10.9 fasteners with torque wrench to 100 Lb.-Ft. (136 N*M)

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to prevent

entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working beneath a

vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and

SAE J684.

Fastener Kit: 51235F

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

Hitch type

Max Gross

Trailer WT (LB)

Max Tongue

WT (LB)

Weight Distributing

8000 (3632 Kg) 800 (363 Kg)

Weight Carrying

Ball Mount

5000 (2270 Kg) 500 (227 Kg)

Wiring Access Location: PU3

Form: F205 Rev C 9-17-2012

Accessory Rating

Printed in Mexico

Frame rail

Note: Fasteners typical both sides

Cross member and step

bumper shown in cut

view for clarity

Existing weldnut

Note : Factory installed

steel step bumper and

brackets must be used in

conjunction with this

hitch

Note : Factory installed

steel step bumper and

brackets must be used in

conjunction with this

hitch

1 2 3

Inhaltsverzeichnis

Seite 1 - Installation Instructions

Installation InstructionsChevrolet Silverado Pickup 1500 GMC Sierra Pickup 1500 (Requires OEM Bumper)Part Numbers:51235Hitch Shown In Pr

Seite 2 - Instructions d’installation

Instructions d’installationChevrolet Silverado Pickup 1500 GMC Sierra Pickup 1500(Pare-chocs d'origine requis)Numéros de pièce :Attelage montré d

Seite 3 - Instrucciones de instalación

Instrucciones de instalaciónChevrolet Silverado Pickup 1500 GMC Sierra Pickup 1500(Requiere parachoques OEM)Números de partes:El enganche s

Kommentare zu diesen Handbüchern

Keine Kommentare

Pro-series 51235 51 Receiver Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Pro-series 51235 51 Receiver herunter. Pro Series 51235 51 Receiver User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Pro-series 51235 51 Receiver