Pro-series 51185 51 Receiver Bedienungsanleitung PDF herunterladen

Installation Instructions

Chevrolet Equinox

Pontiac Torrent

Saturn Vue

Part Numbers:

51185

Hitch Shown In Proper Position

Equipment Required:

Wrenches: 18mm, 19mm & 3/4

Saturn Vue: Open end 3/4 wrench,

Equinox: 6” Ratchet Extension

Drill Bits: None

1. If present, remove the tie down brackets from vehicle frame rail. Return bolts and tie down bracket to owner.

2. Remove the fascia door on the Equinox.

3. Raise the hitch into position; lifting the bumper mounting bracket over the fascia (where needed). Secure with M12 bolts and conical washers into

the existing weld nuts.

4. Hand tighten all bolts.

5. Saturn Vue:

Pull carriage bolts and small blocks thru end of the bumper and feed through the bumper mounting bracket using the pull wire.

Attach conical washer and nut. As shown Figure 1.

Chevrolet Equinox, Pontiac Torrent install the M12 bolts and conical washer through the bumper mounting bracket into the existing

weld nuts in the bumper, as shown Figure 2.

6. Tighten all 1/2-13 GR5 fastener with torque wrench to 75 Lb.-Ft. Tighten all M12 CL8.8 fasteners with torque wrench to 68 Lb.-Ft.

7. Replace the fascia door on the Equinox.

Note: Due to different configuration of the vehicle there will be extra hardware left over.

Rev. A8-28-0951185NSheet 1 of 3

z 2009 Cequent Performance Products

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to

prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working

beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5

and SAE J684.

Fastener Kit: 51185F

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

Wiring Access Location: Chevrolet SUV3

Pontiac SUV3

Saturn SUV1, SUV2

Form: F205 Rev A 5-6-05

Fasteners typical both sides.

Bumper Mounting Bracket

Figure 2.

Existing Weld Nuts

Figure 1.

Pull Wire blocks

Frame Rail

Pull Wire

See Step 5

Existing Weld Nuts

Fascia

Bumper

Pull WireQty. (1)

Carriage Bolt 1/2-13Qty. (2)

Block 1-1/2 X 2Qty. (2)

Conical WasherQty. (6)

Hex Nut 1/2-13Qty. (2)

Hex Bolt M12Qty. (6)

Drawbar Kit:

36051

Drawbar must be used in the

RISE

position only.

3500 LB (1589 Kg.) Max Gross Trailer Weight

300 LB (136 Kg.) Max Tongue Weight

1 2 3

Inhaltsverzeichnis

Seite 1 - Installation Instructions

Installation InstructionsChevrolet EquinoxPontiac TorrentSaturn VuePart Numbers:51185Hitch Shown In Proper PositionEquipment Required: Wrenches: 18mm,

Seite 2 - Instructions d’installation

Instructions d’installationChevrolet EquinoxPontiac TorrentSaturn VueNuméros de pièces :51185Attelage montré dans la position appropriéeÉquipement req

Seite 3 - Instrucciones de instalación

Instrucciones de instalaciónChevrolet EquinoxPontiac TorrentSaturn VueNúmeros de partes:51185Equipo necesario:Llaves: 18mm, 19mm y 3/4Saturn Vue: Llav

Kommentare zu diesen Handbüchern

Keine Kommentare

Pro-series 51185 51 Receiver Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Pro-series 51185 51 Receiver herunter. Pro Series 51185 51 Receiver User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Pro-series 51185 51 Receiver